Colido col3d-lfd004 W 3d-gold Filamento PLA, 1,75 mm, 0.5 kg, bianco

Acquistato questo filamento per le mie due stampanti 3d Colido Diy (piatto non riscaldato) e Anet A8, avevo trovato in regalo questa bobina di PLA con la Colido diy e poi utilizzato anche su Anet A8,  non riscontrando problemi e venendo bene le stampe, essendo all’inizio della stampa 3d credo sia un buon prodotto per iniziare e sperimentare.

 

Nuova Anet E10

Ultimo modello della ANET E10 con frame in alluminio eccovi le specifiche:

● 12864 LCD screen and keypad for easy offline use
● Supports 0.1 – 0.4mm printing layer thickness
● Supports TF card off-line printing, especially convenient when without the computer
● 220 x 270 x 300mm large build volume, just right for you
● More stable aluminum frame delivers a better printing experience
● Assembly is simple and suitable for all DIY customers
● Working condition: 10 – 40°C, humidity 20 – 50 percent

●Type: DIY
●Model: E10
●Platform board: Aluminum Sheet
●Nozzle quantity: Single
●Nozzle diameter: 0.4mm
●Product forming size: 220 x 270 x 300mm
●Layer thickness: 0.1-0.4mm
●Memory card offline print: SD card
●LCD Screen: Yes
●Print speed: 40 – 120mm/s
●Supporting material: ABS,HIPS,PLA
●Material diameter: 1.75mm
●File format: G-code,STL
●Model supporting function: Yes
●XY-axis positioning accuracy: 0.015mm
●Z-axis positioning accuracy: 0.004mm
●Voltage: 110V/220V
●Working Power: 250W
●Host computer software: Cura
●Packing Type: unassembled packing
●System support: Windows, Mac
●Dimensions and Weight Product weight: 7.8000 kg
●Package weight: 9.0000 kg
●Product size: 40.00 x 44.00 x 49.50 cm / 15.75 x 17.32 x 19.49 inches
●Package size: 50.00 x 45.00 x 20.00 cm / 19.69 x 17.72 x 7.87 inches

 

 

la potete trovare su:

ANET E10

ANET A8 MY CURA 2.6.2 SETTING

 

My setting ANET A8 CURA 2.6.2 SETTING ( PLA)

PRUSA SETTING.jpg

Startcode:
G21 ;metric values
G90 ;absolute positioning
M82 ;set extruder to absolute mode
M107 ;start with the fan off
G28 X0 Y0 ;move X/Y to min endstops
G28 Z0 ;move Z to min endstops
G1 Z15.0 F9000 ;move the platform down 15mm
G92 E0 ;zero the extruded length
G1 F200 E3 ;extrude 3mm of feed stock
G92 E0 ;zero the extruded length again
G1 F9000
M117 Printing…

End G Code:
M104 S0 ;extruder heater off
M140 S0 ;heated bed heater off (if you have it)
G91 ;relative positioning
G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
G1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more
G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
G90 ;absolute positioning
G1 Y190 F9000 ;use this line if you want the bed to move to the front. delete if not.
M84 ;steppers off